Knowledge Base Presented By Pix4D “UAS RTK/PPK Performace Analysis”

How regular, RTK, PPK solutions function?

As a professional photogrammetry solution provider, we like to provide the answer with solid experiments rather than just theoretical assumptions. So, what does an RTK /PPK drone do, and what is so special about it?



When you fly a non-RTK drone with an onboard GPS receiver or a receiver along with the camera, you get camera positions trilaterated from satellites, meaning their positions were identified by several distance measurements. Normally, you will encounter an inaccuracy up to several meters, especially in Z directions, depending on the equipment quality and the satellite geometry.





With a data-link connection, such as GSM or Wi-Fi, an RTK drone will connect to a base station or a virtual reference station (VRS) via the laptop which controls the flight. The camera positions are calculated in real-time, referring to these ground reference whose location is accurately measured for a long period of time. The calculation helps correct the camera positions up to 2 to 3 centimeters of accuracy, both horizontal and vertical.




However, things do not always work perfectly. People who often work on site may encounter interrupted connections which interfere the real-time corrections for camera positions. The system gives float solutions or even gets back to standalone mode. The camera positions are RTK-float, indicating a big uncertainty of the corrections. The accuracy will again be tens of centimeters for RTK-float, or even up to meters of accuracy as you would get from non-RTK flights. In this case, you can perform the computation referring the ground reference afterward: post-processed kinematic (PPK).




RTK/PPK for no GCP conditions, but what if you have GCPs?

Which provides you a better accuracy? RTK, PPK, or GCPs?


There is an advantage of using RTK/PPK drones over non-RTK ones if you do not plan to apply any ground control points (GCPs) due to some on-site limitation or the painful measuring procedures. However, an RTK/PPK drone needs to pair with specific hardware and software. The whole system needs to support the communication with base stations or VRS and to includes post-processing features. It is also crucial to have a compatible image processing software, such as Pix4Dmapper, which takes into account different accuracies of individual camera position.


All these high-tech implementations make the RTK/PPK drones much more expensive than the others. Here we provide quality comparisons between RTK/PPK flights with no GCP used and non-RTK flights with well-distributed GCPs. This article can serve as a prerequisite or a reference for those who are considering whether to buy a new drone or to stay with GCPs.



To better investigate the performance, we did two separate flights: one with RTK mode and the other with standalone mode (real-time corrections disabled or connection lost during flight) over two different types of regions:
Crop fields 
and Urban areas.


<Left: eBee Plus take-off in a field; Right: flight planning with eMotion 3>


Flights were performed with a senseFly eBee Plus and GCPs measured with Javad Triumph-ls. Both RTK flights and standalone flights of the same region followed the same configurations. We used GCPs to adjust the camera positions of standalone-mode flights, and the same set of check points to assess the accuracy of both modes. All projects were processed with Pix4Dmapper, using the default 3D Map template.


Field Flight 

Single grid, height = 102 m (GSD 2.5 cm), overlap 80%





While flying over a field, the connection is generally going well without too much obstruction. Our RTK flight has 99% of the camera positions fixed so clearly, no post-processing (PPK) is needed.




Here we compare the accuracy from the RTK flight without using any GCPs and the standalone-mode flight with well-distributed GCPs. The result from RTK flight in the field is quite impressive.


It gives around one-pixel (2.5 cm) accuracy in all directions: X, Y, and Z. In standalone mode, we get 3.6 meters of vertical accuracy, which can be expected without applying position corrections or using any GCPs.


<Accuracy assessment of an RTK flight and a non-RTK one, without using any GCPs>


Once we applied a set of GCPs, the errors in Z greatly decreased. However, we also found that the distribution plays an extremely important role in this type of project. Here we also compare the accuracy when using GCPs in different allocation:



<Left: GCPs on the edges: large vertical errors around a tall corn field and far from GCPs; Right: GCPs on the edges and one more in the middle of the field: vertical errors dramatically reduced>



From the chart, we could see that by placing one more GCP in the middle of the field, the vertical accuracy improved from 65 cm to around 6.6 cm. The error accumulates when it gets further from the GCPs and when there is a difficult region around.


“A difficult region” here refers to cases that could be problematic for feature finding and image matching, and crop fields is one of them. Images taken from such regions generate more position errors which lead to lower accuracy. In this case, the precise camera positions (99% RTK-fixed at the first stage) functions as dense and well-distributed GCPs.


<Accuracy assessment of processing with different GCP allocations>


Urban Flight 

Double grid, height = 102 m (GSD 2.5 cm), overlap 80%

Flying a fixed-wing drone over an urban area could be more complicated. Apart from the permission issues, you need an open place for take-off and landing, which is not always feasible for urban regions.


In this project, we found a spacious sports park close to the city center. The buildings, trees, and local Wi-Fi interfered the data-link connections during the flight. It turned out that only 71% of the camera positions were well-corrected (RTK-fixed.)



In real situations, the uneven distribution of RTK-float (positions not well-corrected) caused a barrier from improving the global accuracy. From the results, we noticed the disadvantage of the RTK flight when the connection was lost due to the obstructions. In such conditions, PPK improves the result. Although it is not guaranteed to be always better than using GCPs, they are quite close in our case.


In the RTK flight, we found larger errors closer to where the RTK-float camera positions were located, while in the post-processed results, the error looks more even throughout the entire region.


<Acquired camera position: RTK-fixed displayed in gray and RTK-float in green, size referring to the values>


<Accuracy assessment for the RTK flight (71% RTK-fixed), post-processed (PPK) result, and the project with GCPs>



For fields or places, either flat or with large relief, where the data-link connections are stable and without obstructions, the RTK flight can describe the terrain very well and gives extremely accurate results without using any GCPs.


Mapping with an RTK/PPK drone is especially advantageous when there is dense vegetation, crops, or some difficult-to-match features in image content. You always keep the high accuracy and quality outputs in control, disregard where you put or are able to put your GCPs.


<Field: GSD 2.5 cm, check points marked in green and the size refers to the error values;
vertical accuracy of the RTK flight: 2.7 cmwith well-distributed GCPs: 6.6 cm >


In urban regions, there may be a difference. While in certain parts you may loose connections which ends up uneven distribution of RTK-float camera positions, you may find it difficult to improve the overall accuracy. In our case, PPK gives better results than the RTK flight though neither one provides better accuracy than the one processed with well-distributed GCPs.



<Urban: GSD 2.5 cm, check points marked in green and the size refers to the error values; 
vertical accuracy of the PPK solution: 6.7 cmwith well-distributed GCPs: 4.8 cm >


Now we have seen the output quality of both solutions. However, there are things we also need to keep in mind:
the feasibility, the time, the cost, and where you are based.


It is not always feasible to measure GCPs due to many reasons on site, such as fragile terrain textures, unreachable spots, and other personal safety concerns. Also, the planning and measurement of GCPs could take hours each time, while the post processing normally takes only 10 to 20 minutes. As for expense, the measurement of GCPs is a cost you spend on for every project area, unlike a one-time-charge of buying an RTK/PPK drone. Considering for a longer term, getting an RTK/PPK drone seems to be a better investment.


Ready for getting an RTK/PPK drone? Do not forget to check if you have access to the local base station or VRS network if you go for the RTK/PPK solution. Otherwise, you would still need to measure your own base stations!

For more information visit

Author: Lisa Chen

Data Acquisition: Dai Shi, Lisa Chen  

No Replies to "Knowledge Base Presented By Pix4D “UAS RTK/PPK Performace Analysis”"